INTRATHERM F1P

Forced convection with
EC-tangential fan.

Guarantees an even quicker
delivery of heat.

Technical information (german) Brochure Output calculator

Toggle

Designs Technical information Downloads Control components

Designs

Different materials and colours lead to numerous scopes of design. Varying frames are used to conceal the transition between the convector tray and the prepared floor.Watch the samples below.

Roll-up grilles and rigid linear grilles

The colours shown here are not binding. Chromatic aberrations are possible due to technical reasons. Subject to technical changes.
Wood

The colours shown here are not binding. Chromatic aberrations are possible due to technical reasons. Subject to technical changes.
Anodised aluminium

The colours shown here are not binding. Chromatic aberrations are possible due to technical reasons. Subject to technical changes.
Stainless steel

The colours shown here are not binding. Chromatic aberrations are possible due to technical reasons. Subject to technical changes.
U-frames

U-frames are available in the same colour shades as the aluminium grilles.
L-frames

L-frames are available in the same colour shades as the aluminium grilles.
Z-frames

Z-frames are only available in the colour shade “natural aluminium”.

Technical information

The underfloor convectors by VOGEL&NOOT meet numerous internationally recognised quality standards.

Quality marks
Varying dimensions and different designs lead to a wide range of models, suitable for different requiremets.

System design

Test positive pressure: 13 bar

Max. positive operating pressure: 10 bar

Max. operating temperature: 110 °C
Connection examples
Recommended mounting
Dimensions at 180 mm width
Dimensions at 290 mm width
Angled bevel cut examples
Rectangular bevel cut examples
Curved tray

Downloads

Here you can download all relevant data in different file formats.

Images in different resolutions for specific use in printings (300 dpi) or on screens (72 dpi).

Control components

For the most efficient operation, we offer a wide range of perfectly matched control components.

Infrared remote control / PER-04-DO

LCD ambient temperature controller / PER-03

Room thermostat / PPT-02

Room thermostat / PPT-01

Thermal adjusting drive / PTP-01

Thermostatic adjusting drive / PTH-01

Radiator valve / PTV-01 / PTV-02

Manual speed switch / PSP01

"Large glass surfaces are important design elements for designing living rooms in an open way which makes use of natural light. Invisible heating systems are the perfect products here to ensure that the utmost aesthetic and heating requirements are met, even in cold times of the year."

Manfred Lechner, Designer

Expert opinion Reseller Search

Spotlights

Added value with modern low-temperature radiators [Many benefits with panel radiators]
- Compatible with all energy sources:
  • Range of supply temperatures from between 90 ° and less than 40 °C
  • Perfect for the combination with low-temperature heat sources (heat pump, solar energy …)
  
  Enormous potential for cost reduction with new buildings & renovations:
  • Approx. 15 % less energy costs with replacement radiators
  (as comp. with old element radiators)
  • Thanks to high performance, only low system temperatures are required
  
  Extremely fast control in the heating-up and cooling time
  • Fast reaction time after sudden temperature changes (less energy)
  • High efficiency due to short cooling & heating-up times
  • Control is of very good quality
Meeting the increased environmental awareness [41% of the CO2 emissions are caused by buildings]
- Throughout the world, efforts are being made to save energy and conserve our planet’s resources. VOGEL&NOOT is supporting these efforts with high-tech radiators and underfloor heating systems in order to permit efficient heat output in conditions of complete comfort.
Factory-adjusted kv-setting [Saving of energy costs and CO2 reduction]
- Panel radiators are delivered ready for double-pipe installation and with a factory-adjusted kv-setting, appropriate to the radiator output. Of course it is also possible to change the pre-adjusted valve setting when the equipment is operating at pressure.